Hunan Yuanju Power Tools Manufacturing Co., Ltd

info@lithiumpowertool.com

+8615802613809

enLanguage
Home / Products / Electric Tools

Electric Tools

What is Electric Tools

Electric tools refer to tools that are powered by electricity instead of manual labor. These tools can range from small handheld devices such as drills, saws, and sanders, to larger industrial equipment used in manufacturing or construction.A power tool is a tool that is powered by an additional source of power and mechanism, as opposed to using only hand tools for manual labor. The most common types of power tools use electric motors. Internal combustion engines and compressed air are also commonly used.Electric tools generally provide more power and speed compared to their manual counterparts, making them ideal for jobs that require high levels of precision and efficiency. They also reduce the physical strain put on the user, allowing for longer periods of work without fatigue.Common electric tools found in households and workshops include power drills, circular saws, jigsaws, angle grinders, and power sanders. These tools are widely used in woodworking, metalworking, and construction, among other industries.

 
Benefits of Electric Tools
 
01/

Better performance
Many power tools have a range of adjustable settings to enable better control for more involved tasks. Finally, power tools perform the same functions as hand tools with significantly less effort and energy, leaving you with more energy at the end of the day.

02/

Speed and efficiency
Electric power tools may ultimately not only produce better results than hand tools, but they also complete the same tasks in significantly less time. Some power tools even include features that reduce human error, providing consistency and efficiency that helps speed up projects. With tools that perform faster, you can give more of your focus to important tasks and make more progress in the same amount of time.

03/

Precision and accuracy
With greater power, consistency and adaptability, electric power tools can perform tasks with greater accuracy. These tools combine power with precision and allow you to perform fine-detail work even in cramped spaces. Power sanders in particular offer highly accurate results that would take incredible patience and stamina to achieve by hand.

04/

Convenience
A large percentage of power tools are portable, which lets you transport them to any job site. Handheld electric tools are versatile and perform well in hard-to-reach spots, making jobs in cramped spaces much easier. With a tool that performs tasks quickly and precisely, you can conserve valuable time and energy and move on to the next task, getting more done in a short amount of time.

First 1234567 Last 1/7
Why Choose US

Professional team

Our professional team collaborate and communicate effectively with one another, and are committed to delivering high-quality results. They are capable of handling complex challenges and projects that require their specialized expertise and experience.

Innovation

We are dedicated to improving our systems continually, ensuring that the technology we offer is always cutting edge.

 

 

One stop solution

We can offer a range of services, from consultation and advice to product design and delivery. It is a convenience for the customers, as they can get all the help they need in one place.

24h online service

We try and respond to all concerns within 24 hours and our teams are always at your disposal in case of any emergencies.

 

Types Of Electric Tools
 

 

 
Mini angle grinder

Mini angle grinder is a small handheld power tool that is designed for grinding, polishing, and cutting various materials such as metals, wood, ceramics, and plastics. It is smaller and lighter than a regular angle grinder, making it ideal for working in tight spaces or for precision work. They are commonly used by DIY enthusiasts and professionals alike for a variety of applications.

 
Tile leveling machine

Tile leveling machines are tools used during tiling projects to ensure that tiles are evenly and securely placed on the surface. They work by using wedges and spacers to maintain consistent spacing and levelness between tiles, resulting in a professional-looking finish.

 
High torque brushless impact wrench

A high torque brushless impact wrench is a handheld power tool designed to provide high levels of torque without the need for a power cord. It utilizes Brushless DC (BLDC) motor technology, which provides greater power efficiency, longer operational lifespan and less wear and tear. This type of impact wrench is commonly used in automotive repair and assembly, construction, and other heavy-duty applications that require high levels of torque.

 
Portable high pressure water spray gun

A Portable High Pressure Water Spray Gun is a handheld device designed to spray water at a high pressure. It is commonly used for cleaning outdoor surfaces such as patios, driveways, and cars. The gun typically attaches to a garden hose and can be adjusted to vary the water pressure and spray pattern. Portable and easy to use, high pressure water spray guns are a popular tool for homeowners and professionals alike.

 

 

 

 

How to Change the Head of Power Tools
 
1

Power off or uninstall the battery
Before replacing the head of the power tool, ensure that the tool is powered off or the battery is removed to avoid accidental start-up.

2

Unlock the tool head
Look for the release button or knob on the tool that holds the head in place. This may be a press button, a lock nut, or some other form of locking device.

3

Remove accessories or knives
Use an appropriate tool, such as a wrench, wrench wrench pliers, or a specific accessory unloading tool, to unfasten the nut or retaining screw of the attachment or tool. Note that some tools may require specialized tools.

4

Install new accessories or tools
Insert the new attachment or tool into the tool head and make sure it is aligned with the drive shaft of the tool head. Use the nut or screw of the tool attachment to secure the new attachment or tool.

5

Lock the tool head
If there is an unlock button or knob, make sure to re-lock it after replacing it. This helps hold the tool head in place and prevents loosening during use.

6

Check and test
Before use, check that the tool head is firmly installed to ensure that everything is normal. Accessories or tools can be manually turned to ensure free movement without jamming or abnormal resistance.

7

Power on the device again
When everything is ready, reconnect the power or plug in the battery and prepare the tools for normal use.

Power Tools Purchase Tips

Determine your needs

Before making a purchase, it's essential to identify the type of power tool you need and how often it will be used. This will help you choose the right tool or toolset that will fit your needs.Safety should be a top priority when choosing a power tool. Ensure that the tool has all the necessary safety features to prevent accidents and injuries.

Consider the brand

It's crucial to choose a reputable brand that is known for producing high-quality power tools. Brands that have been in the market for an extended period are typically more reliable and have a better reputation.

21V Single Suction Handheld Tile Vibrator
21V Rechargeable Brushless Reciprocating Saw

Check for product warranty

Power tools can be expensive, and it's critical to ensure that the product has a warranty. A good warranty will give you peace of mind and protect your investment in case of any defects.

observe the quality of power tools

There is a trick to judging the quality of a tool. The first is the appearance quality. Observe whether there are any defects in its appearance and whether it feels good. The appearance quality of the power tool is good, the appearance color is uniform, and there are no obvious defects. Check whether the product structure is complete. Compare the instructions carefully to see if there is anything missing. Look at the material it is made of, whether it is durable and not easy to wear. Check whether its 3C certificate is consistent with the parameters on the tool nameplate. It is best to check whether the 3C certificate of the tool is currently valid.

How to Use Power Tools

Wear safety gear
Always wear safety gear such as safety glasses, earplugs, and gloves when using power tools. This will protect you from potential injuries.

Keep the work area clean and organized

Make sure that your working area is clean and organized before using any power tool. This will minimize the risk of accidents.

Select the correct tool for the job

Use the appropriate tool for the job that you are doing. Using the wrong tool can cause damage to both the tool and the material you are working with.

Check the tool before use

Before using any power tool, inspect it for any damage, loose parts or visible defects. Never use a damaged or defective tool.

Connect the tool properly

Make sure to connect the power tool properly to a power source or an extension cord. Make sure that the cord is unplugged before changing blades or bits, or adjusting the tool.

Use the tool slowly and carefully

Turn on the tool slowly and carefully. Let it build speed gradually, then use it with precision and control. Avoid putting too much pressure on the tool.

Turn off the tool before making adjustments

Always turn off the power tool before making any adjustments or changing the blades or bits.

Application Areas of Power Tools
 

Construction
Power tools have revolutionized the way construction work is accomplished. They are used to make tasks faster, efficient and more accurate, thereby saving time and money. Power tools like electric drills, circular saws, angle grinders, nail guns, and sanders have become essential tools for builders, contractors, and carpenters.

 

Woodworking
Power tools have revolutionized the woodworking industry, making it easier, faster and more efficient to complete woodworking projects. From table saws and hand-held routers to sanders and drills, power tools provide a wide range of capabilities to achieve clean, precise and intricate cuts, shapes and finishes. They allow woodworkers to work with a variety of materials and tackle complex tasks with greater precision, control and safety.

 

Automotive
Some common power tools used in the automotive industry include impact wrenches, air ratchets, angle grinders, pneumatic hammers, and sanders. These tools help mechanics to easily remove or install parts, repair engines, and maintain vehicles. They also reduce manual labor and increase speed, resulting in a faster turnaround time and increased profitability for automotive businesses.

 

Electrician
Electricians use a variety of power tools to perform their job efficiently and safely. Some commonly used power tools for electricians include drills, saws, sanders, and pneumatic tools such as staple guns and nailers. These tools help electricians to cut, drill, and fasten materials, as well as locate and diagnose electrical problems. Additionally, specialized tools like wire strippers, cable pullers, and fish tapes help electricians to install and maintain electrical systems. Proper use and maintenance of power tools is critical to ensure safety and efficiency in electrical work.

21v Professional Tile Leveling Machine Tiles Vibrator

Precautions for Power Tool Operation

 

 

Wear protective gear

As you start working with power tools, it is important to wear protective gear such as safety glasses, gloves, and earplugs to avoid any potential hazards. Protective gear helps to minimize the risk of injuries, protect users from debris, and prevent hearing loss from the deafening noise produced by some power tools.

Proper clothing

Always wear fitted clothing that is free of any loose or dangling features such as jewelry or scarves that might get caught in the moving parts of the tool. Clothing should be made up of thick fabrics such as denim that provides additional protection against sharp edges.

Choose the right tool

Always use the correct power tool for the job in hand. Using the wrong power tool may lead to accidents as it may not be designed to handle the task at hand. Moreover, don't attempt to modify or alter any power tools and always stick to the user manual guidelines.

Avoid distractions

Stay focused while working with power tools and avoid distractions. Don't use power tools under the influence of drugs or alcohol, as it can impair judgment and reaction time. Additionally, if you are feeling unwell or tired take a break or stop working.

Keep your working area clean and tidy

Make sure your work area is well lit and unobstructed. Clear the area of potential hazards such as debris, fluids, or electrical cords to avoid tripping. Moreover, make sure the power tool is unplugged when not in use and keep the cord away from sharp objects or heat sources.

How to Maintain Power Tools

 

 

Read the manual thoroughly
Before using a power tool, read the manufacturer's instructions and store the manual in a safe place for future reference. The manual provides valuable information on how to use the tool correctly, safely, and how to maintain it.

Regularly clean your power tools
Dust, debris, and other particles can accumulate on power tools, which can affect their operation and damage their internal components. Therefore, it's essential to clean them regularly using a soft cloth or brush.

Lubricate moving parts
Lubrication plays a vital role in the function of power tools. Lubricate the moving parts of the tool periodically to ensure that they operate smoothly.

Check the electrical cords
Electrical cords can become damaged during use. Check the cords regularly for any damage or fraying. If you find any damage, replace the cord immediately.

Store power tools correctly
Store your power tools in a safe and dry place. Avoid putting them in damp places that can cause corrosion, and keep the cords neatly coiled.

Sharpen tools
Sharpen saw blades, drill bits, and other cutting tools regularly. Sharp cutting tools work more efficiently and can prevent accidents.

 

 

Working Principle of Electric Tools
Electric tools are devices that use electricity to perform specific functions, such as drilling, cutting, grinding, sawing and sanding. These tools are powered by electric motors that convert electrical energy into mechanical energy to generate the required power. Better efficiency and flexibility are the key advantages of electric tools compared to their conventional counterparts.

 

The essential component of an electric tool is the electric motor. When electricity flows through the motor, it produces a magnetic field that causes the rotor to rotate. The rotor is connected to the attached drill bit, saw blade or accessory, and therefore, it drives the tool to perform the prescribed action.

 

Electric tools are classified based on their level of power output, which is measured in watts. Small tools, such as those used for drilling small holes have lower power output, usually under 500 watts, whereas larger tools, such as rotary hammers or angle grinders can have power outputs of several thousand watts.

 

The most commonly used electric tools are powered by AC (alternating current) motors that run on the standard 110-120 volts or 220-240 volts AC supply. However, battery-powered tools have gained a lot of popularity in recent years because of their convenience and portability. These tools use DC (direct current) motors that are powered by rechargeable batteries. The batteries come in different capacities and voltages, depending on the power requirements of the tool.

 
 

What Are the Differences Between Electric Tools and Equipment
Firstly, the primary function of electric tools is to perform specific actions or tasks that require precision, accuracy, and power. Common examples of electric tools include power drills, saws, sanders, and angle grinders. These tools are designed to be lightweight, portable, and easy to use, allowing users to work on various types of materials with relative ease.

 

On the other hand, electric equipment is generally larger, more complex, and often has multiple functions. This includes devices such as refrigerators, air conditioners, and washing machines, which are designed to perform specific tasks in a residential or commercial setting. Electric equipment is not designed to be portable and is typically stationary, requiring a dedicated power source to function effectively.

 

Another significant difference between electric tools and equipment is their power source. Electric tools are typically powered by batteries or by plugging them into an electrical outlet, whereas electric equipment requires a dedicated power source, such as a wall outlet or generator.

 

Lastly, electric tools tend to be more affordable and easily accessible to users, while electric equipment typically requires a larger investment and specialized knowledge to operate effectively.

 
 

What is the importance of knowing how to use electrical tools safely
Firstly, electrical tools operate at high voltage and current levels that can cause serious injury or even death if used improperly. Therefore, proper understanding of the electrical equipment and its usage is essential to avoid such accidents.

 

Secondly, electrical tools have many moving parts and sharp edges that can cause injuries if one does not know how to handle them correctly. Knowing how to use these tools safely helps reduce the risk of injury.

 

Thirdly, using electrical tools improperly can damage the equipment, leading to additional costs and downtime for repairs and replacements. Consequently, knowing how to use the tools correctly will help ensure their longevity, decreasing the need for frequent repairs and replacements.

 

Fourthly, understanding how to use electrical tools safely helps prevent accidents, injuries, and potential lawsuits that could arise from negligence.

 

Finally, knowing how to use electrical tools safely is essential for maintaining a safe and productive work environment. Safe use of electrical tools helps prevent accidents and injuries that can interfere with work productivity, thereby ensuring that work is completed efficiently and effectively.

 
General Safety Requirement Checklist Electric Tools

Inspect the tool before use. Check for any damage, wear or cracks in the tool. If you find any defects, do not use the tool, and have it repaired or replaced.

Ensure that the tool is properly grounded or double-insulated. This is necessary to prevent electrical shock.

Use the proper extension cord. If you need to use an extension cord, make sure it is rated for the tool and that it is in good condition. Avoid using cords that are frayed or damaged. Do not use an extension cord that is too long or too short.

Use Personal Protective Equipment (PPE). Always use the appropriate PPE, including goggles, gloves, and hearing protection, as required for the specific tool.

Follow the manufacturer's instructions. Read and follow all instructions before using the tool. Do not modify the tool in any way.

Keep the tool clean and dry. Clean the tool after each use, and make sure it is dry before storing it.

Use the tool in a safe manner. Never use a tool in an unsafe manner. Always be aware of your surroundings, and use the tool with care.

Store the tool in a safe manner. Store the tool in a safe, dry place where it will not be damaged.

Inspect the tool regularly. Regularly inspect the tool for any damage or wear. Do not use a tool that is damaged or not functioning properly.

Certificate
 

productcate-1000-356

productcate-1000-356

 

FAQ
 
 

Q: What are electric tools?

A: Electric tools refer to tools or devices that are powered by electricity or battery instead of manual labor. These tools make work more efficient and less strenuous, and can include anything from power drills and saws to sanders and impact wrenches.

Q: How do electric tools work?

A: Electric tools work by converting electric energy into mechanical energy. The electric motor present in the tool converts the electric current into rotary motion, which is then used to power the tool. A rechargeable battery or a power cord is used to supply the electric current to the motor. The motor's speed can be controlled using a trigger or a switch, allowing the user to adjust the tool's output.

Q: What are the advantages of using electric tools?

A: Electric tools offer a number of advantages, including faster operation speeds, increased power, improved precision, and reduced labor costs. Additionally, electric tools are more environmentally friendly compared to their gas-powered counterparts and require less maintenance.

Q: How do I choose the right electric tool for my project?

A: When choosing an electric tool for your project, consider the type of task you need to accomplish, the size and complexity of the project, the available power sources, and the durability and quality of the tool. Additionally, look for tools with features that enhance safety and efficiency, such as ergonomic handles, adjustable speed settings, and automatic shut-off functions.

Q: How do I maintain my electric tools to ensure longevity?

A: Regular maintenance of electric tools is crucial for ensuring their longevity. This includes keeping them clean and dry, checking the power cord and plug for damage, lubricating moving parts, tightening screws and bolts, and replacing worn or damaged parts promptly. It is also important to store tools properly, protect them from extreme temperatures and moisture, and use them according to the manufacturer's instructions.

Q: What safety precautions should I take when using electric tools?

A: When using electric tools, it is important to take a few safety precautions to prevent accidents or injuries. Some safety tips are to always follow the manufacturer's instructions, wear appropriate personal protective equipment, such as safety goggles and gloves, inspect the tool before each use for any damage or faults, and use a ground fault circuit interrupter (GFCI) to prevent electrical shocks.

Q: How do I troubleshoot common issues with electric tools?

A: To troubleshoot common issues with electric tools, start by checking if the tool is properly plugged in and the circuit breaker is not tripped. If the tool still does not work, check the power cord for any damage or cuts. For mechanical issues, check if parts are missing or damaged and replace them if necessary.

Q: Can electric tools be used in wet or damp conditions?

A: Electric tools should never be used in wet or damp conditions as water and electricity can be a dangerous combination. This could cause damage to the tool, harm to the user, or even result in an electric shock or fire. Always ensure that equipment is kept dry and use appropriate safety measures when working outdoors or in damp environments.

Q: How do I properly store and transport my electric tools?

A: To properly store and transport your electric tools, make sure they are cleaned and dried before storing them in a dry and cool place away from direct sunlight. You should also ensure that your tools are securely packed and cushioned for safety during transportation.

Q: How often should I replace the blades or bits on my electric tools?

A: It is recommended to replace blades or bits on electric tools when they become dull or worn out, or at least once a year with regular use to maintain their sharpness and effectiveness.

Q: What are some common accessories for electric tools?

A: Common accessories for electric tools include drill bits, saw blades, sanding discs, wrenches, batteries, chargers, safety goggles, ear protection, stands, clamps, work lights, and carrying cases. These accessories enhance the functionality, safety, and convenience of electric tools and enable users to perform a wide range of tasks with greater efficiency and precision.

Q: Can electric tools be used for heavy-duty projects?

A: Yes, electric tools can be used for heavy-duty projects, but it is important to choose the right tool with sufficient power, durability, and capabilities for the task at hand. Additionally, using proper safety equipment and following manufacturer's instructions and precautions can help ensure efficient and effective use of electric tools for heavy-duty projects.

Q: What is the difference between corded and cordless electric tools?

A: Corded electric tools receive power directly from an electrical outlet via a cord, while cordless electric tools are powered by batteries that require periodic recharging. Corded tools typically provide consistent and more powerful performance, while cordless tools offer greater mobility and convenience.

Q: Can electric tools be used internationally?

A: Yes, electric tools can be used internationally. However, it is important to ensure that the voltage and plug type of the tool match the electrical standards of the country you are using it in. In some cases, a voltage converter or plug adapter may be necessary for the tool to function properly. It is also important to check if the tool meets the safety standards of the country where it will be used.

Q: How do I properly dispose of the batteries used in cordless electric tools?

A: Batteries used in cordless electric tools should be properly disposed of by recycling them. Many hardware and home improvement stores offer battery recycling programs, and some municipalities may have drop-off locations for battery disposal.

Q: How do I find replacement parts for my electric tools?

A: To find replacement parts for your electric tools, you can check the manufacturer's website or contact their customer service department. You can also search online retailers or visit a local home improvement store for replacement parts. It's important to have the model and serial number of your tool when searching for replacement parts to ensure compatibility.

Q: How are electrical tools classified?

A: Power tools are classified as either stationary or portable, where portable means hand-held. Portable power tools have obvious advantages in mobility. Stationary power tools, however, often have advantages in speed and precision.

Q: What is the common electrical tools and equipment?

A: Some specialty electrical tools like voltage testers, wire strippers, and linesman pliers come in handy from time to time, and these are readily available at most home centers, hardware stores, electrical supply stores, and online retailers.

Q: Why do we need electrical tools and equipment?

A: They let you carry out more specialized tasks and work with a wide variety of materials. These tools offer steadfast consistency and produce highly accurate results. Finally, they perform the same functions as hand tools with considerably more efficiency and less effort.

Q: Why are power tools important?

A: There are many benefits of power tools that you should consider before making your purchase. Power tools can help you save time and energy while completing projects, and they can also make the job easier and more enjoyable. For example, a cut off saw can help you quickly and easily cut through wood or other materials.

We're well-known as one of the leading electric tools manufacturers and suppliers in China. Please rest assured to wholesale high quality electric tools at competitive price from our factory. For more discount information, contact us now.

rechargeable pipe heating fuser, nail gun cordless, ppr pipe welding machine
Copyright © Hunan Yuanju Power Tools Manufacturing Co.,Ltd. All Rights Reserved.Privacy Policy
goTop

(0/10)

clearall